TP 310 / 310S Tainless Steel Sheet Metal Astm A240
TP 310 / 310S Tainless Steel Sheet Metal Astm A240 overview
Stainless steel 310 sheet is a medium carbon austenitic stainless steel, for heat applications such as furnace parts and hotness procedure tools. It is used at temperature levels up to 1150 ° C in continual service, as well as 1035 ° C in recurring solution. Stainless steel 310 coil (UNS S31000) is an Austenitic stainless steel developed for use in temperature corrosion resisting applications. However, due to its high chromium material (25%), Stainless steel 310S plate is more deterioration immune than the majority of warmth resistant alloys. 310/310S Sheets & Plates are readily fabricated by standard industrial procedures. In comparing to carbon steel, stainless-steels are harder and also often tend to work harden quickly. ASME SA 240 Stainless steel DIN 1.4301 / 1.4306 / 1.4307 Sheet & Plate can be bonded utilizing all of the usual welding processes. SS 310 Sheet can be quickly bonded and also refined by typical facility fabrication methods. 1.4845 is very appropriate for laser beam of light welding. To stay clear of getting too hot or burn-through of thinner sheets, greater welding rate needs to be used.
Produc Forms : Sheet, plate , Coil , Strip .wire , Pipe, Tube ,Bar , Profile, Round, Flat, Square, Hexagonal
| Product Type | 310 Stainless Steel Sheet, 310 Stainless Steel Plate |
| Other Trade Name of 310 Stainless Sheet | SS 310, SUS 310, Inox 310, DIN 1.4840, UNS S31000, AISI 310, SAE 310 Sheet |
| Specification | ASTM A240 / ASME SA240 |
| Tolerances (width / thickness) | EN 10258/ DIN 59381) |
| EN 10151 Stainless Steel 310 Strips |
| EN 10088 A240 Tp 310 strips |
| International Standard | ASTM A 480 |
| ASTM A 959 |
| ASME IID |
| EN ISO 9445 |
| EN ISO 18286 |
| EN 10051 |
| EN 10088-1 |
| ISO 15510 |
| Dimensions | Cold rolled 310 Stainless Steel Plate 0.5-6.4 mm |
| Hot rolled 310 Stainless Steel Plate 3.0–10.0 mm |
| Thickness | 0.1 to 100 mm Thk |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Cutting Methods | Laser Cut, Plasma Cut, Waterjet Cut, Saw Cut, Shear/Guillotine |
| Finish | SATIN, 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled, 1D, No.4, BA, 8K, hairline, brush, mirror etc. |
| Hardness | Spring Hard, Soft, Hard, Half Hard, Quarter Hard |
| Manufacturing Range | Plate, Sheet, Coils, Foils, Plain Sheet, Rolling Sheet, Rolling Plate, Strip, Flats, Clad Plate, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, Flat Shim, Flat Sheet, Shim Sheet, tread plate, Checker Plate |
Some Normal specification at a glance
| | ASTM | JIS | AISI | EN |
| Grade | S30100 | SUS301 | 301 | 1.431 |
| S30400 | SUS304 | 304 | 1.4301 |
| S30403 | - | 304L | 1.4307 |
| S31008 | SUS310S | 310S | 1.4845 |
| S31603 | - | 316L | 1.4404 |
| S32100 | SUS321 | 321 | 1.4541 |
| S41008 | SUS410S | 410S | - |
| S43000 | SUS430 | 430 | 1.4016 |
| S43932 | - | - | 1.451 |
| S44400 | SUS444 | 444 | 1.4521 |
| S44500 | SUS430J1L | - | - |
Dimension Ranges:
Width: 600mm~2030 mm
Thickness: 0.1~120.0 mm
Length: 300~6000 mm , Max 18000 mm
Surface Finish: No.1, 2B, BA, No.3, No.4, No.5, No.8, HL, Etching, SB, Ti-coating,color-coating ,embossing .
Versatile and useful in many areas, 310 Stainless Steel is often found in furnace parts, heat exchangers, welding filler wire, oil burner parts, and general heat treatment.
- Flare tips
- Fluidized bed coal combustors
- Radiant tubes
- Tube hangers for petroleum refining and steam boilers
- Coal gasifier internal components
- Thermowells
- Refractory anchor bolts
- Burners, combustion chambers
- Retorts, muffles, annealing covers
- Food processing equipment
- Cryogenic structures
DIN 1.4845
DIN X12CrNi25-21
DIN X8CrNi25-21
AFNOR Z12CN2520
BS 310S24
UNI X6CrNi2520
SS 2361
UNE F.331
SAE 310S
JIS SUH310
JIS SUS310S
JIS SUS310STP
JIS SUS310STPY
JIS SUS310STB
JIS SUS310SFB
EN X8CrNi25-21
EN 1.4845
UNS S31008
JIS SUS310S
Chemical Composition
The chemical composition of stainless steel grade 310 MoLN is outlined in the following table.
| Element | Content (%) |
| Iron, Fe | Balance |
| Chromium, Cr | 24-26 |
| Nickel, Ni | 21-23 |
| Molybdenum, Mo | 2-2.50 |
| Manganese, Mn | ≤ 2 |
| Nitrogen, N | 0.10-0.16 |
| Silicon, Si | ≤ 0.70 |
| Phosphorous, P | 0.025 |
| Carbon, C | ≤ 0.020 |
| Sulfur, S | ≤ 0.010 |
Mechanical Properties
The mechanical properties of stainless steel grade 310 MoLN are displayed in the following table.
| Properties | Metric | Imperial |
| Tensile strength | 540-740 MPa | 78320- 107327 psi |
| Proof strength | 250 MPa | 36259 psi |
| Modulus of elasticity (20°C) | 195 GPa | 28282 ksi |
| Elongation at break (In 2", 50% cold worked) | 40% | 40% |
| Hardness, Brinell | 95 | 95 |
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free . Freight charge collect
Q:What information should i provide to source for the right products ?
A: Material grade, width, thickness, coating and Purchase quantity , Expected lead time ,etc
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
Q:How long does your delivery time take?
A:In general, our delivery time is within 5-45 days, and may be delayed if the demand is extremely
large or special circumstances occur.
Q:Can I visit your location?
A:Of course, we welcome customers from all over the world to visit our factory. However, some
of the plants are not open to the public.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified
products will be destroyed.We provide All original Mill test certificate and support third party inspection.
Q:How to pack the products?
A:The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion during ocean transportation.
Q:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00,
we will reply to your inquiry during the next working day.
904l Stainless steel sheet ,coil ASTM B625 UNS N08904 Application
Product Tags:
|
|
254SMO Cold Rolled Stainless Steel Sheets Metal 310S Medium Carbon Images
|
